Your band members will sound check their own instruments and their systems such as the screen initially and then you, the singer or the singing section will do your own noise check last once the stereo for the musical instruments are already well balanced. Sound check in this sequence will enable you to hear how you sound when you are actually singing with your band.
At the sound check, make certain that your microphone is devoid of its stand if you wish to move or dance during your singing efficiency. Also ask the sound equipment service technicians for a monitor to be positioned in front of you so that you can hear yourself sing. If you can get your hands on a pair of sound display earpiece, that will be better since this will provide you more space to bound around and entertain your audience and fans.
When your band and you as the lead singer usage electronic musical instruments such as the electric guitar, electrical bass or the microphone etc, performing a sound check is necessary to stabilize the noise of the instruments and your voice.
Ways to sound check the singer’s microphone?
At the sound check, make sure that your microphone is totally free from its stand if you want to move around or dance during your singing efficiency. Sometimes, this may result in loud feed backs (that loud piercing screeching noise produced by the microphone) so much so that your sound service technician or yourself must understand where the maximum volume can be before the annoying screeching feedback takes place. The sound technician must mark this limit on his sound board control.
Throughout the crescendo parts of songs, move away from the microphone so that you do not activate feedback and move back in again throughout the softer part of the tunes. By doing this, you are not only able to control feed backs, you will likewise not aggravate delicate audience who may not delight in loud singing. On the other hand, when the singing is soft and you are far from your audience, they may not be able to construct exactly what you are singing which is why you have to move closer to the microphone when the analysis of the tune calls for you to sing gently.
The final sound check – At the end of the sound check session, you and your band need to go through a couple of tunes. This is done not just because you wish to hear whether the sound is great from the audience viewpoint however also whether all your band members can hear themselves, the band as a sound and entire from their displays.
It is essential to look out for lyrics or consonants beginning with ‘P’s and ‘B’s. These consonants might cause explosive pop sounds on the microphone when you are singing loudly into the microphone. If you believe ‘M’, you will be able to prevent ‘please’ and ‘child’ blowing up from the speakers.
Your singing voice when produced by the microphone needs to be louder and above the sounds produced by the band so that your voice can bring the tunes well and able to represent your feel, tune analysis and feelings plainly. In some cases, this might lead to loud feed backs (that loud piercing screeching noise produced by the microphone) a lot so that your noise technician or yourself should understand where the optimum volume can be prior to the annoying shrieking feedback occurs. The sound specialist needs to mark this threshold on his sound board control.
- Posted in: Entertainment